Optical Transceiver Module
100G QSFP28
new products
  • XBR-G6MIDR12PTPOD-32G software license
    Brocade XBR-G6MIDR12PTPOD-32G BR-MIDRMFEB-01-Z software license for HD-G620-24-32G switch

    Brand Brocade License PN XBR-G6MIDR12PTPOD-32G License Inside PN  BR-MIDRMFEB-01-Z Place of origin Malaysia Form Factor F/S Inside SFP:8pcs 32G 850nm SW Active Brocade HD-G630-48-32G switch Low End Case Temperature (°C) 0°C High End Case Temperature (°C) 70°C Diagnostics Digital Transmitter VCSEL Receiver PIN Voltage Supply 3.3--5v Connector Dual LC Warranty 1 year Condition new DDMI Yes Time of delivery  Within 24 hours Package Brocade original package

    read more
  • G720-64-32G-F Fiber Optical Switch
    24/64 ports Brocade G720 Switch G720-64-32G-F Fiber Optical Switch

    The Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation, this switch delivers a fixed-port building block designed to maximize the performance of flash and NVMe environments to meet demanding workloads. With Brocade Gen 7 technology, the Brocade G720 delivers far more than just speed and latency improvements. It can eliminate the pain of managing your data center, with autonomous SAN technology to deliver a network that can self-learn, self-optimize, and self-heal without intervention.

    read more
  • QDD-400G-ZRP-S
    Compatible QDD-400G-ZRP-S 400G ZRP Optical Transceivers

    Product Description This MSA compliant QSFP-DD transceiver provides 400GBase-ZR Open ZR+ throughput over Single-mode fiber (SMF) using a coherent wavelength and using an LC connector. It is built to MSA standards and is uniquely serialized and data-traffic and application tested to ensure that they will integrate into your network seamlessly. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. ProLabs’ transceivers are RoHS compliant and lead-free. TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products.

    read more
  • SFP 1.25G FR 15km
    Compatible Mikrotik XS+2733LC15D SFP 1.25G FR Single Mode 1270nm+ 1330nm 15km Optical Transceivers

    Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. Details Product code XS+2733LC15D Connector Single LC UPC Data Rate 1G / 10G / 25G Distance 15 km Format SFP / SFP+ / SFP28 Mode Single mode Wavelength 1270nm + 1330nm

    read more
  • QSFP+ 10G SR 15km
    Compatible Mikrotik XS+2733LC15D 10G QSFP+ SR Optical Transceivers

    Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers

    read more
  • BR6505-24-8G-R/BR6505-24-16GR/BR6505-24-16GR/6505-24-0-R
    12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-24-16GR/BR6510-24-16GR/6505-24-0-R Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01

    12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498

    read more

Cisco QSFP-100G-DR-S 10-3057-01 QSFP28 100GBASE DR Optical Module 500m Over SMF

Cisco QSFP28-100G-DR-S Transceiver's Overview

The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our latest generation of 100G transceiver modules solution based on a QSFP form factor.


  • item no.:

    QSFP-100G-FR-S
  • lead time:

    2-3 working days
  • product orgin:

    China
  • brand:

    Top-Trans
  • shipping port:

    Shenzhen
  • payment:

    ex-w
  • Warranty:

    3 Years
  • Condition:

    New
  • Temperature:

    10℃~70℃/ -5℃~85℃/ -20℃~85℃
  • Data Rate:

    100G
  • Distance:

    500m
  • Wavelength:

    1310nm
  • Connector:

    LC
product details


Cisco QSFP-100G-DR-S 10-3057-01 QSFP28 100GBASE DR Optical Module 500m Over SMF


Cisco QSFP28-100G-DR-S Transceiver's Overview

The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our latest generation of 100G transceiver modules solution based on a QSFP form factor.



Parameters for the Cisco QSFP28 100G Optical Transceiver:

Fiber Type OS2 single-mode fiber
Connector LC
Transmit and Receive Wavelength (nm) 1304.5 to 1317.5nm


Modal Bandwidth (MHz*km)*1

2000 (OM3)

4700 (OM4)

4700 (OM5)

Pull Tab Color Orange
Lasers and TIA VCSEL and PIN
Tx Power -2.9 to 4 dBm
Rx Sensitivity -5.9 to 4 dBm
Extinction Ratio 2.0 dB
Power Consumption 4.3 W
Single Power Supply 3.3 V
Dimensions (H x W x D)13.5 x 18.4 x 72.4 mm


Features and benefits of Cisco QSFP modules

Hot-swappable input/output device that plugs into a 100G Gigabit Ethernet Cisco QSFP port

Interoperable with other IEEE-compliant 100GBASE interfaces where applicable

Certified and tested on Cisco QSFP-100G ports for superior performance, quality, and reliability High-speed electrical interface compliant to IEEE 802.3bm;


The Cisco QSFP-100G-DR-S Module supports link lengths of up to 500 m over a standard pair of G.652 Single-Mode Fiber (SMF) with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over a single wavelength using onboard PAM4 modulation and FEC. QSFP-100G-DR-S interoperates with 400G transceivers that comply with IEEE 400GBASE-DR4, such as Cisco's QSFP-400G-DR4-S, via fiber break-out cables.

Environmental conditions Operating temperature range: Commercial temperature range: 0 to 70°C (32 to 158°F)

Storage temperature range: -40 to 85°C (-40 to 185°F)


Platform support Cisco QSFP-100G-DR-S is supported on a wide range of Cisco equipment.

Cisco Nexus 9300-EX Series 93180YC-EX Cisco Nexus N9K-C92160YC-X Cisco NCS-5501



Photo for Cisco QSFP28 100G QSFP-100G-DR-S Transceiver





FAQ

Q1. Except for this Cisco QSFP28 100G QSFP-100G-DR-S optical modules, what else Cisco sfp can you offer?

A1: Topstar can offer Cisco optical module from 1G SFP, 10G SFP+, 16G/32G FC SFP+, 25G SFP28, 40G QSFP+ to 100G QSFP28, etc....


Q2. How do you guarantee the Cisco QSFP28 100G optical transceiver you offer is genuine?

A2: 1st, Topstar's target is to be a respected century-enterprise, based on this, we only sell 100% genuine brand transceiver because reputation worths more;

2nd, Topstar works on this optical transceiver field for 16 years, we have our mature supply chain, all the Cisco cooperators is verfied;

3rd, we have our strict procedure for how to verify the identify true and false of the Cisco transceiver by label,appearance,serial number checking, and also test equipment;

4th, if you found any faked or copied Cisco optical module from us, we will refund and afford all the freight for ship and return;


Q3. How does your company do regarding quality control for this Cisco QSFP28 100G optical module?

A3: Every single optic individually tested in our test center to make sure it can work befor shipment;





Send Us An Inquiry

We will contact you as soon as possible!

related products
  • 100GBASE QSFP28 100G QSFP28 100GBASE-LR4 100GB 10KM 5G Wireless SFP Transceiver

    The 100G QSFP28 100GBASE-LR4 10KM transceiver data sheet (singlemode, 1310nm, 10km) is Compatible with Linksys, Ericsson, DCN, Allied, price list on Topstar , buy it now!

  • 100GBASE QSFP28 Optical Module 100G QSFP28 Transceiver 100GBASE-ER4 100GB 40KM 5G Optical Module

    Buy 100Gb/s 100GBASE-ER4 40KM QSFP28 transceiver compatible with Juniper Huawei Brocade, Force10 Networks 100GBASE-ER4 (SMF, 1310nm, 40km) & price list on Topstar, Hot pluggable QSFP28 MSA form factor,Compliant to IEEE 802.3ba 100GBASE-ER4,Up to 40km reach for G.652 SMF,Single +3.3V power supply,Operating case temperature: 0~70oC,Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm),Receiver: 4x25Gb/s PIN ROSA,4x28G Electrical Serial Interface (CEI-28G-VSR),Maximum power consumption 4.0W,Duplex LC receptacle,RoHS-6 compliant

  • 100GBASE QSFP28 Fiber Transceiver 100G QSFP28 CWDM 2KM MPO Multi Mode Fiber Transceiver

    This product is a 100Gb/s transceiver module,which is 10GBASE 100G QSFP28 CWDM 2KM. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.

  • 100GBASE QSFP28 100G QSFP28 100GBASE-SR4 100GB 100M SR Transceiver Module

    The 100G QSFP28 100GBASE-SR4 module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.

  • Finisar FTLC1152SGPL  QSFP28 100GBASE-IR4 Finisar FTLC1152SGPL compatible 100GBASE-IR4 CWDM QSFP 2KM QSFP28 module

    This product is a 100Gb/s transceiver module designed for optical communication applications compliant with the QSFP MSA,CWDM4 MSA and portions of IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts  them  to 4 output  channels   of electrical data.

  • Finisar FTLC9551REPM QSFP28 100GBASE-SR4 Finisar FTLC9551REPM compatible 100GBASE-SR4 OTU4&128G 100m QSFP

    This product is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 100 meters of OM4 multi-mode fiber.

  • Finisar FTLC1152SGPL  QSFP28 100GBASE-IR4 Finisar FTLC1151RDPL compatible 100GBASE-LR4 10km 100G QSFP28 CWDM4 Optical Transceiver

    This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

  • Finisar FTLC1151RDPL  100GBASE-LR4 QSFP28 Compatible Finisar FTLC1151RDPL Compatible 100GBASE-LR4 QSFP28 10km Optical Module

    This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com

chat now

live chat

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!