+86-15989863956
lisa@topsfp.com
English
русский
español
العربية
中文
register for newsletter
get latest company news
Brocade XBR-G6MIDR12PTPOD-32G BR-MIDRMFEB-01-Z software license for HD-G620-24-32G switch
read more
The Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation,
read more
Compatible QDD-400G-ZRP-S 400G ZRP Optical Transceivers
read more
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
read more
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers
read more
12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498
read more
This is a Juniper Networks JNP-QSFP-DAC-5M compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over active copper with a maximum reach of 5.0m (16.4ft).
item no.:
40GBASE-CR4 QSFP Tobrand:
Top-TransWarranty:
1 YearCondition:
NewData Rate:
100GDistance:
5m
QSFP-4SFP10G-CU3M compatible Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ Direct Attach Breakout Cable
40G QSFP+ to 4xSFP+ Direct Attach Cable Passive Twinax 3m
Cisco compatible QSFP to four SFP+ copper direct-attach breakout cables are suitable for very short distances and offer a very cost-effective way to connect within racks and across adjacent racks. These breakout cables connect to a 40G QSFP port of a Cisco switch on one end and to four 10G SFP+ ports of a Cisco switch on the other end. Cisco currently offers passive cables in lengths of .5, 1, 2, 3, 4 and 5 meters;
Features
● Connector A: 1x QSFP 40Gbps Rated Connector (QSFP+ MSA SFF-8436 Compliant)
● Connector B: 4x SFP+ 10Gbps Rated Connector (SFP+ MSA SFF-8431 Compliant)
● Economically Links up a QSFP port with an upstream 10GbE-SFP+ Switch
● Compliant with IEEE 802.3ba 40GBASE-CR4 standard
● Up to 10.3125 Gbps transfer rate per SFP+ channel (40 Gbps aggregate)
● Bridge the gap between your 10G and 40G capable switches/host adapters
● High-Density QSFP 38-PIN and 4x SFP 20-PIN Connector
● Reduced power budget and lower port cost compared to transceiver and AOC
● RoHS Compliant and Lead-Free
● 24AWG to 30AWG cable available
● Operating temperature range: 0 to 70°C
● RoHS Compliant and Lead-Free
Applications
● 10/40 Gigabit Ethernet links
● 40G Ethernet transmission (40GBASE-CR4)
● InfiniBand 4x SDR, DDR, QDR
● 10G/40G Ethernet Switches, Routers, and HBAs
● Data center interconnect
● Networked storage systems
● High density connections between networking equipment
| Max Data Rate | 40Gbps |
| Minimum Bend Radius | 21mm |
| Jacket Material | PVC |
| Cable Type | Copper Cable |
| DDM/DOM | NA |
| Wire AWG | 30 AWG |
| Cable impedance | 100 Ω |
| Power supply | 3.3V |
| Protocols | 40G InfiniBand 8x DDR, 4x QDR, 10G/40Gigabit Ethernet, Fibre Channel |
Description
The QSFP-4SFP10G-CU3M is suitable for very short distances and offers a highly cost-effective way to establish a interconnect between the devices using QSFP+ ports and SFP+ ports. The QSFP+ to 4xSFP+ DAC breakout cable is designed for 40Gb/s high-speed interconnecting networking applications such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. It fully complies with QSFP+ Multi-Source Agreement (MSA) standards SFF-8436 and SFP+ MSA SFF-8431. This passive DAC cable has no signal amplification built into the cable assembly.
The QSFP-4SFP10G-CU3M DAC copper cable is programmed to be compatible with a wide range of Cisco network equipment for intra-rack connections in data centers such as Ethernet Switches, Routers, Network Interface Cards (NICs) and Network Servers. It’s a cost-effective alternative to high-cost Cisco QSFP-4SFP10G-CU3M 40Gb/s QSFP+ 3m DAC breakout cable
prev :
Cisco QSFP-4X10G-AOC3M Compatible Breakout Active Optical Cable 40G QSFP+ To 4x10G SFP+ 3Mnext :
5m JNP-QSFP-DAC-5M Direct Attach Copper Cable Compatible Juniper Networks 40G QSFP+ Passive
10M AOC-Q-Q-100G-10M Arista Compatible 100G QSFP28 Active Optical Cable
Active Optical Cable (AOC) is a cabling technology that accepts same electrical inputs as a traditional copper cable, but uses optical fiber “between the connectors”. AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility with standard electrical interfaces.
5m JNP-QSFP-DAC-5M Direct Attach Copper Cable Compatible Juniper Networks 40G QSFP+ Passive
This is a Juniper Networks JNP-QSFP-DAC-5M compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over active copper with a maximum reach of 5.0m (16.4ft).
Cisco QSFP-4X10G-AOC3M Compatible Breakout Active Optical Cable 40G QSFP+ To 4x10G SFP+ 3M
Topstar's QSFP+ to 4 x SFP+ breakout active optical cables (AOC) is designed for the interconnect between 40G Ethernet (40GbE) and 10G Ethernet (10GbE) applications., which is also known as QSFP+ splitter AOC or QSFP+ Fan-out AOC.
100G QSFP28 AOC Fiber Patch Cable 10M AOC-Q-Q-100G-10M Arista Compatible
The Arista AOC-Q-Q-100G-10M Compatible QSFP28 Active Optical Cables are direct-attach fiber assemblies with QSFP28 connectors and operate over Multi-Mode Fiber (MMF).
5m LC UPC To SC UPC Duplex Fiber Patch Cable OS2 Single Mode
The LC/UPC-SC/UPC Fiber Patch Cord Duplex SM G.657.A1 2.0mm 1m Yellow (Part number: PT-SM-LCU-SCU-DX-5M) from Topstar is a Duplex patch cord with LC/UPC connector at one side and a SC/UPC connector at the other one.
LC UPC To LC UPC Duplex Fiber Patch Cable OS2 Single Mode PVC 3.0mm 1m
1m LC UPC To LC UPC Fiber Optic Patch Cord Duplex OS2 Single Mode PVC 3.0mm
10m SC UPC To SC UPC Patch Cord Duplex 3.0mm OFNR 9/125 Single Mode
OS1 Single mode cable is used widely in the telecommunications industry for high speed single mode transmission
Aqua 1m MPO MPO Type OFNP fiber optic trunk cable OM3 Multimode
MPO trunk cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles.
get latest company news
copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com
friendly links :
