Optical Transceiver Module
Fiber Patch Cable
new products

5M 12 fibers MTP Female OM4 Multimode Type B Plenum MTP Trunk Cable

MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. 5M 12 fibers MTP Female OM4 Multimode Type B Plenum MTP Trunk Cable
  • item no.:

    5M 12 fibers MTP
  • brand:

    Top-Trans
  • Warranty:

    1 Year
  • Condition:

    New
  • Data Rate:

    100G
  • Distance:

    10m
product details

5M 12 fibers MTP Female OM4 Multimode Type B Plenum MTP Trunk Cable



The five-meter PT-12OM4MTP-C5 MTP Multimode Patch Cable supports 40/100 Gb Ethernet speeds and is designed for high-density connections between network equipment in telecommunication rooms and data centers. With two female MTP connectors, this OM4-rated multimode fiber optic cable is recommended for high-density fiber patching between data center MDFs (main distribution frames) and IDF (intermediate distribution frames). It’s colored aqua for instant identification as an OM4 cable. Base-8 Fiber compatible with both QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 connections.


The 12-fiber MTP connectors are about the same size as SC connectors, but are 12 times denser, freeing up circuit card and rack space for other cables. The cable is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards. Push/pull tab connectors are easily accessible in high-density data center applications and make the cable easy to install and remove with one hand. The plenum-rated jacket is perfect for connecting high-speed network components in ceilings, walls and ducts.


Fiber Type OM4 50/125um
Wavelength 850/1300nm
10G Ethernet Distance 400m at 850nm
40/100G Ethernet Distance 150m at 850nm
Polish Type UPC to UPC
Minimum Bend Radius 7.5mm
Attenuation at 850nm ≤2.3 dB/km
Attenuation at 1300nm
≤0.6 dB/km
Installation Tensile Load 66N
Tensile Strength (Long/Short Term) 80N/240N


Premium multimode fiber optic cabling for transmitting 40/100 Gb data and voice signals over short distances. Designed for high-density connections between network equipment in telecom rooms and data centers.


Push/pull tab connectors install/remove with one hand

12-fiber MTP/MPO connectors with 12x density of SC connectors

100% tested for low insertion loss and back reflection
Base-8 Fiber compatible with both QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 connections
50/125 OM4-rated multimode fiber
Aqua color for easy OM4 identification


MTP/MPO Connectors with Push/Pull Tabs
12-fiber female connectors 12 times denser than SC connectors
Push/pull tab connectors easy to install and remove with one hand
100% tested for low insertion loss and back reflection


Error-Free Signal Transfer
50/125 duplex glass fiber construction
Plenum-rated jacket perfect for ceilings, walls and ducts



Send Us An Inquiry

We will contact you as soon as possible!

related products

copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com

chat now

live chat

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!