+86-15989863956
lisa@topsfp.com
English
русский
español
العربية
中文
register for newsletter
get latest company news
Brand Brocade License PN XBR-G6MIDR12PTPOD-32G License Inside PN BR-MIDRMFEB-01-Z Place of origin Malaysia Form Factor F/S Inside SFP:8pcs 32G 850nm SW Active Brocade HD-G630-48-32G switch Low End Case Temperature (°C) 0°C High End Case Temperature (°C) 70°C Diagnostics Digital Transmitter VCSEL Receiver PIN Voltage Supply 3.3--5v Connector Dual LC Warranty 1 year Condition new DDMI Yes Time of delivery Within 24 hours Package Brocade original package
read more
The Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation, this switch delivers a fixed-port building block designed to maximize the performance of flash and NVMe environments to meet demanding workloads. With Brocade Gen 7 technology, the Brocade G720 delivers far more than just speed and latency improvements. It can eliminate the pain of managing your data center, with autonomous SAN technology to deliver a network that can self-learn, self-optimize, and self-heal without intervention.
read more
Product Description This MSA compliant QSFP-DD transceiver provides 400GBase-ZR Open ZR+ throughput over Single-mode fiber (SMF) using a coherent wavelength and using an LC connector. It is built to MSA standards and is uniquely serialized and data-traffic and application tested to ensure that they will integrate into your network seamlessly. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. ProLabs’ transceivers are RoHS compliant and lead-free. TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products.
read more
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. Details Product code XS+2733LC15D Connector Single LC UPC Data Rate 1G / 10G / 25G Distance 15 km Format SFP / SFP+ / SFP28 Mode Single mode Wavelength 1270nm + 1330nm
read more
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers
read more
12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498
read more
Compatible Alcatel-Lucent SFP-10G-CWDM-LR Compatible 10G CWDM SFP+ 1270~1610nm 10km Transceiver，Up to 10km。
This 10GBase-LR CWDM SFP+ module provides a cheap replacement for Alcatel-Lucent Nokia SFP-10G-CWDM-LR SFP+ CWDM transceiver optics. It is strictly tested before shipment and works fine with Alcatel-Lucent Nokia CWDM networking equipment. This 10G CWDM SFP+ LR optics is designed for 10-gigabit coarse wavelength-division multiplexing fiber-optic networks application. It has been programmed to ensure compatibility with Alcatel-Lucent Nokia 10G network switches, routers, firewalls, security gateway, media converters, NAS, servers, network adapters, and interface cards (NICs). This compatible CWDM SFP+ transceiver provides a low-priced third-party excellent alternative solution for fiber connectivity in the large data centers, enterprise wiring closets, large campuses, Metro Area Networks, Remote Radio (RRU), and Baseband Unit (BBU).
item no.:
1000BASE CWDM SFP+ Llead time:
2-3 working daysproduct orgin:
Chinabrand:
Alcatel-Lucentshipping port:
Shenzhenpayment:
ex-wWarranty:
3 YearsCondition:
NewTemperature:
0℃~70℃/ -5℃~85℃/ -20℃~85℃Data Rate:
1000BASEDistance:
10kmWavelength:
CWDMConnector:
LCCompatible Alcatel-Lucent SFP-10G-CWDM-LR Compatible 10G CWDM SFP+ 1270~1610nm 10km Transceiver
PRODUCT FEATURES
• Functionally identical to Alcatel-Lucent Nokia SFP-10G-CWDM-LR 10G CWDM SFP+ module
• Compliant with 802.3ae 10GBASE-LR
• CWDM DFB transmitter, PIN photo-detector
• Up to ~10km on 9/125µm SMF
• Support Digital Diagnostic Monitoring interface
• Reduce the cost of leasing or laying fiber
• Use with CWDM MUX/DEMUX, combined CWDM optics solution
Compatibility:
Testing in Cisco/ Brocade/ Juniper/ Dell/ Arista/ HPE/ H3C etc devices to guarantee 100% compatible with your equipment.
OEM& ODM:
Customized label and package , OEM and ODM service offered
Compatible Finisar FWLF1632xx Fixed Channel DWDM 120km SFP Optical Transceiver
Finisar FWLF1632xx optical transceivers are Fixed Channel DWDM SFP designed for use in Dense Wavelength-Division Multiplexing (DWDM) links, for up to 120km link lengths and up to 2.7G bit rates. DWDM 120km SFP transceivers are designed for service providers deploying SONET and DWDM networking equipment in metropolitan access and core networks. They are also compatible to Gigabit Ethernet data rate. The 120km DWDM SFP transceivers are RoHS 6 compliant. Basic digital diagnostic features are implemented as described in Finisar Application Note AN-2030. Enhanced diagnostic features are available as described in the DWDM SFP MSA.
Compatible XENPAK 10GBASE-SR 10G SR 850nm Fiber Optical Transceiver Module
The 10G XENPAK SR 850nm Supports a link length of 26m on standard FDDI grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3). Up to 400m link lengths are possible when using 4700 MHz/km MMF (OM4).
Pluggable Compatible Juniper CFP-100GBASE-LR4 100GBASE-LR4 CFP module compliant with IEEE 802.3ba Optical Transceriver
Pluggable Compatible Juniper CFP-100GBASE-LR4 100GBASE-LR4 CFP module compliant with IEEE 802.3ba Optical Transceriver Transceiver Type:CFP，Connector:SC，Monitoring Available:Yes，Standard: 100GBASE-LR4，Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4):IEEE 802.3ba-2010，Transmitter wavelengths (range)
Compatible Cisco SFP-10G-SR 10-2415-03 10G SFP+ 300m Optical Transceiver for Cisco ASR 9000 ASR-9900-RP-SE switch
Cisco SFP-10G-SR can be used on original Cisco Switch N9K-C9396PX; The Cisco 10GBASE SFP+ modules (Figure 1) offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications; The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.
Compatible WTD 1.25G SFP 1310nm RTXM191-400 DFB 1310nm 15km Optical Module
Compatible WTD 1.25G SFP 1310nm RTXM191-400 DFB 1310nm 15km Optical Module are designed for optical interfaces for data communications with Single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.
Original Finisar FTRJ1422P1BTL 622M-EX SFP Optical Modules
Finisar’s FTRJ1422P1xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They comply with SONET and SDH standards2 at OC-12 LR-1/STM L-4.1. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.
Compatible Original Finisar FWLF15217Dxx 2G 1550nm CWDM 50km Mini-GBIC SFP Transceiver Module
Finisar FWLF15217Dxx CWDM 50km 2G SFP transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet and Fibre Channel networking equipment. Finisar 50km 2G CWDM are available in eight different CWDM wavelengths and comply with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition, the transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.
Used Finisar FTLC1121RDNL 100G CFP2 100G-LR4 10km CFP2 Optical Transceiver CFP Module
Used Finisar FTLC1121RDNL 100G CFP2 100G-LR4 10km CFP2 Optical Transceiver CFP Module Place of Origin:Guangdong, China，Brand Name:Finisar，Model Number:FTLF1436P3BCL，Rate:25Gb/s，Wavelength:1310nm，Distance:10KM，Connector:LC/MPO Connector，Diagnostics:digital，Name:SFP28 LR，Temperature:0°C~70°C，Voltage supply:3.3v，Application:Telecom Datacom，Warranty:3-year
get latest company news
copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com
friendly links :
