QSFP-40G-LR4 Compatible 40GBASE-LR4 and OTU3 QSFP+ 1310nm 10km LC DOM Transceiver Module

DDM/DOM Support:Yes Cable Type:MMF,Wavelength:850nm,Max Cable Distance:150m @ OM4 MMF

item no.:
40G QSFP LC 10km
Warranty:
1 Year
Condition:
New
Temperature:
0~70°C
Data Rate:
41.25Gbps
Distance:
10km
Wavelength:
850nm
Connector:
LC

contact now

product details

Product Details

Compatible	QSFP-40G-SR4	Vendor Name	FS
Form Type	QSFP+	Max Data Rate	41.25Gbps
Wavelength	850nm	Max Cable Distance*	150m @ OM4 MMF**
Connector	MTP/MPO	Transimitter Type	VCSEL 850nm
Cable Type	MMF	DDM/DOM Support	Yes
CDR	Supported	Protocols	40G Ethernet, Infiniband QDR, SATA/SAS3, IEEE 802.3ba, MSA Compliant
TX Power	-7.6~2.4dBm	Receiver Sensitivity	<-12dBm

Send Us An Inquiry

We will contact you as soon as possible!

subject :
QSFP-40G-LR4 Compatible 40GBASE-LR4 and OTU3 QSFP+ 1310nm 10km LC DOM Transceiver Module

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

related products

Original Brand DS-SFP-FC64G-SW Fiber Optic Equipment Hot Selling for AI Data Centers
Compatible Asa CWDM Fiber 10G 1270~1610nm 40km GBIC Module
This SFP+ ER CWDM transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Compatible CWDM 10G 1470~1610nm 80km SFP GBIC Ethernet Lan Cards
This SFP+ ZR CWDM transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 80km. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a APD photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
All-New Original Brand DS-SFP-FC64G-SW Hot Selling Fiber Optic Equipment for AI Data Centers
All New Original Brand DS-SFP-FC64G-SW Hot Selling Fiber Optic Equipment for AI Data Centers
QSFP-40G-SR4 Compatible 40GBASE-SR4 QSFP+ 850nm 150m 10-2072-03 Transceiver Module
The 40G SR4 supports distances compatible with 10GBASE-SR, which is 150m on multi-mode fiber. In addition the SR4 optic can support 4 individual 10G-SR connections using MTP Trunk cable and LC duplex cables for multi-mode fiber.
ONS-SI-100-FX Compatible 100BASE-FX SFP 1310nm 2km 10-2350-01 DOM Transceiver Module
ONS 15454 ML-Series Multirate Ethernet Card - 15454-ML-MR-10,Transceiver unit with independent,1310nmFP Laser diode transmitter
Compatible Finisar Juniper 10GBASE X2 1310nm 10km LR Transceiver Module
The X2 Module is a highly integrated, Serial optical transponder module for high-speed, 10Gbit/s data transmission applications. 4×3.125Gbps Ethernet Signal Input by XAUI Interface. An integrated Coder / Decoder and multiplexer / demultiplexer .