register for newsletter
get latest company news
item no.:
GLC-BX40-U-IWarranty:
1 YearTemperature:
0 to 70°CData Rate:
155MDistance:
40kmWavelength:
Tx1310/Rx1550nmConnector:
LC simplexGLC-BX40-U-I Compatible 1000BASE-BX-U BiDi SFP 1310nm-TX/1550nm-RX 40km DOM Transceiver Module
Features
Transceiver unit with independent
1310nmFP Laser diode transmitter
In GaAs PIN photo diode receiver
Up to 155Mbps data rate operation
Up to 40KM on 9/125μmSMF
Standard serial ID information compliant with SFPMSA
Digital Diagnostic Monitor Interface
Very low EMI and excellent ESD protection
+3.3V single power supply
RoHS compliant
Case operating temperature Commercial:0°Cto +70°C Extended:-10°Cto +80°C Industrial:-40°Cto+85°C
Compatible with


prev :
GLC-BX40-D-I Compatible 1000BASE-BX-D BiDi SFP 1550nm-TX/1310nm-RX 40km DOM Transceiver Modulenext :
GLC-BX-20D Compatible 1000BASE-BX BiDi SFP 1550nm-TX/1310nm-RX 20km DOM Transceiver ModuleThis SFP+ ER CWDM transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
This SFP+ ZR CWDM transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 80km. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a APD photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
The 40G SR4 supports distances compatible with 10GBASE-SR, which is 150m on multi-mode fiber. In addition the SR4 optic can support 4 individual 10G-SR connections using MTP Trunk cable and LC duplex cables for multi-mode fiber.
ONS 15454 ML-Series Multirate Ethernet Card - 15454-ML-MR-10,Transceiver unit with independent,1310nmFP Laser diode transmitter
The X2 Module is a highly integrated, Serial optical transponder module for high-speed, 10Gbit/s data transmission applications. 4×3.125Gbps Ethernet Signal Input by XAUI Interface. An integrated Coder / Decoder and multiplexer / demultiplexer .
copyright © 2025 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com