Copper SFP / SFP electrical module Basic Description: SFP package, electrical module, 100 meters. This product supports up to 1.25Gb/s or 10Gb/s transfer rate, can support the maximum transmission distance of 100m (RJ45, 5-type twisted pair for the transmission medium) The Support temperature range (-40 ℃ ~ +85 ℃), RJ45 interface, the working voltage of 3.3 volts.
-
-
10G Copper SFP Juniper EX-SFP-10GE-T Compatible 10GBASE-T SFP+ Copper RJ-45
10G Copper SFP transceivers are based on the SFP Multi-Source Agreement (MSA). Juniper EX-SFP-10GE-T Compatible is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBASE-T SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC should be rese1
-
Compatible SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP
Compatible SFP-GE-T transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable and support CAT 6. 1000Base Copper Modules support 10001
-
Cisco Compatible RJ45 Copper SFP Transceiver Module 10/100Base-T
Cisco Compatible RJ45 Copper SFP transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE802.3u. Copper SFP Transceiver Module supports 100Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports 10/100 Mbps full dupl1
-
SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP
SFP Copper RJ45 Module is high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps Modules) full duple1
-
Compatible SFP-10G-T-S RJ-45 10GBase Copper SFP+ Transceiver
10G RJ45 Copper SFP+ transceivers are based on the SFP Multi-Source Agreement (MSA). Copper RJ-45 Transceiver is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBase Copper SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC should be r1
+86 19860146913
dsale@topsfp.com
English
русский
español
العربية
中文
