#dsale@topsfp.com
English
  • facebook
  • linkedin
  • twitter
  • google+
  • pinterest
  • youtube

what are you looking for?

Optical Transceiver Module
home OEM Fiber Optic Transceiver BASE-T SFP

SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP

BASE-T SFP
new products

SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP

SFP Copper RJ45 Module is high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps Modules) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.Ethernet to SFP,The module provides standard serial ID information compliant with SFP MSA, which can be accessed with an address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.


  • item no.:

    Top-SFP-TF1

  • lead time:

    2-7 Working Days After Payment Received

  • product orgin:

    China

  • brand:

    Top-Trans

  • shipping port:

    Shenzhen

  • Warranty:

    3 Years

  • Condition:

    Compatible

  • Temperature:

    0°C to 85°C

  • Data Rate:

    1000/100/10 M

  • Distance:

    100 M

  • Wavelength:

    N/A

  • Connector:

    RJ45
contact now
Datasheet
product details

SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP

SFP Copper RJ45 Module is compatible with types of equipment for the network solution.


Product Features

Up to 1.25Gb/s bi-directional data links

Hot-pluggable SFP footprint

Extended case temperature range (0°C to +85°C )

Fully metallic enclosure for low EMI

Low power dissipation (1.05 W typical)

A compact RJ-45 connector assembly

Access to physical layer IC via 2-wire serial bus

1000 BASE-T operation in host systems with SERDES interface

10/100/1000Mbps compliant in host systems with SGMII interface

1Gigabit Ethernet over Cat 5 cable


Below is the picture of 10/100/1000 Mbps Modules

10/100/1000 Mbps Modules


Professional Service

Ethernet to SFP is fully tested in Error Detector/ Industrial Oven/ Agilent Oscilloscope/ Digitizer/ Wave Runner, etc. The specialist will test the modules before every shipment.

 




OEM& ODM

Customized label and package. Both OEM and ODM service are offered. 

tags : SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP
Send Us An Inquiry

We will contact you as soon as possible!

related products
  • Cisco Compatible RJ45 Copper SFP Cisco Compatible RJ45 Copper SFP Transceiver Module 10/100Base-T

    Cisco Compatible RJ45 Copper SFP transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE802.3u. Copper SFP Transceiver Module supports 100Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports 10/100 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 25Mbps on each pair. The 10/100Base-T module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

  • SFP-GE-T Compatible SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP

    Compatible SFP-GE-T transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable and support CAT 6. 1000Base Copper Modules support 1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. 1G RJ45 SFP module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

  • 10G Copper SFP 10G Copper SFP Juniper EX-SFP-10GE-T Compatible 10GBASE-T SFP+ Copper RJ-45

    10G Copper SFP transceivers are based on the SFP Multi-Source Agreement (MSA). Juniper EX-SFP-10GE-T Compatible is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBASE-T SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin,  PHY IC should be reset.

  • SFP-10G-T-S Compatible SFP-10G-T-S RJ-45 10GBase Copper SFP+ Transceiver

    10G RJ45 Copper SFP+ transceivers are based on the SFP Multi-Source Agreement (MSA). Copper RJ-45 Transceiver is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBase Copper SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin,  PHY IC should be reset.

  • TOP-SFP-T Compatible With Brocade 57-1000042-01 Copper SFP Compatible With Brocade XBR-000190 Switch 1000M RJ45 100m Fibre Optic For Brocade 7800

    Copper Small Form Pluggable (SFP) transceivers is Compatible with Brocade 7800 7840.SFP 1000M RJ45 100m optical transceivers are designed for 1000Mb/s serial optical interfaces.Please read and check it.

  • 2.5G Single-mode 1550nm 40 KM 2.5G Single-mode 1550nm 40km LR-1 SFP Optical Transceiver Module

    SFP 2.5G single mode 1550nm 40 KM optical transceivers are optimized for STM-16/OC-48 optical interface for telecom applications. They are designed for Multi-rate operation. LR-1 SFP Optical Transceiver Module is optimized for high performance and cost effective to supply customers the best solutions for telecom applications.

  • Finisar FTLF1421P1BCL Transceiver Compatible Finisar FTLF1421P1BCL Duplex SFP 2.67Gbps 15 km SMF DDM 1310nm SONET OC-48 IR-1 Transceiver

    Finisar’s FTLF1421P1xCL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They comply with SONET OC-48 IR-1 (SDH STM S-16.1) standards, Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC-PI 13.0. They are compatible with SONET OC-12 and SONET OC-3 standards. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. They are RoHS compliant and leadfree per Directive 2002/95/EC and Finisar Application Note AN-2038.

  • Finisar FTL4C3QE1C QSFP+ Compatible Finisar FTL4C3QE1C 40GE Universal LM4 QSFP+ To SFP+ Cable CR4 Module

    Finisar’s FTL4C3QE1C QSFP+ transceiver modules are designed for use in 40 Gigabit Ethernet links over duplex multimode or single mode fiber. They are compliant with the QSFP+ MSA1,2 and represent a multimode adaptation of IEEE 802.3ba 40GBASE-LR43 refered to as LM4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU4. See Finisar Application Note AN-2038 for more details5.

contact us

copyright © 2026 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com

chat now

live chat
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!