+86 19860146913
dsale@topsfp.com
English
русский
español
العربية
中文
register for newsletter
get latest company news
10G RJ45 Copper SFP+ transceivers are based on the SFP Multi-Source Agreement (MSA). Copper RJ-45 Transceiver is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBase Copper SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC should be reset.
item no.:
TOP-SFP-T 10Glead time:
2-7 Working Days After Payment Receivedproduct orgin:
Chinabrand:
Top-Transshipping port:
ShenzhenWarranty:
3 YearsCondition:
CompatibleTemperature:
0°C to 65°CData Rate:
10 GDistance:
100 MWavelength:
N/AConnector:
RJ45
Compatible SFP-10G-T-S RJ-45 10GBase Copper SFP+ Transceiver
SFP-10G-T-S Compatible is compatible with etc. types of equipment for the network solution.
Product Features
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Compact RJ-45 connector assembly
RoHS compliant and lead-free
Single +3.3V power supply
10 Gigabit Ethernet over Cat 6a cable
Ambient Operating temperature: 0°C to +65°C
Professional Service
10GBase Copper SFP+ is fully tested in Error Detector/ Industrial Oven/ Agilent Oscilloscope/ Digitizer/ Wave Runner, etc. The specialist will test the modules before every shipment.
OEM& ODM
Customized label and package. Both OEM and ODM service are offered.
SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP
SFP Copper RJ45 Module is high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps Modules) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.Ethernet to SFP,The module provides standard serial ID information compliant with SFP MSA, which can be accessed with an address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.
Cisco Compatible RJ45 Copper SFP Transceiver Module 10/100Base-T
Cisco Compatible RJ45 Copper SFP transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE802.3u. Copper SFP Transceiver Module supports 100Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports 10/100 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 25Mbps on each pair. The 10/100Base-T module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.
Compatible SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP
Compatible SFP-GE-T transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable and support CAT 6. 1000Base Copper Modules support 1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. 1G RJ45 SFP module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.
10G Copper SFP Juniper EX-SFP-10GE-T Compatible 10GBASE-T SFP+ Copper RJ-45
10G Copper SFP transceivers are based on the SFP Multi-Source Agreement (MSA). Juniper EX-SFP-10GE-T Compatible is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBASE-T SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC should be reset.
Copper SFP Compatible With Brocade XBR-000190 Switch 1000M RJ45 100m Fibre Optic For Brocade 7800
Copper Small Form Pluggable (SFP) transceivers is Compatible with Brocade 7800 7840.SFP 1000M RJ45 100m optical transceivers are designed for 1000Mb/s serial optical interfaces.Please read and check it.
Compatible JDSU SFP+ PLRXPL-VE-SH4-2E SPP-10E-SR-CDFB Finisar FTLX8571D3BNL-E5 850nm 10g SFP module
Compatible JDSU SFP+ PLRXPL-VE-SH4-2E SPP-10E-SR-CDFB Finisar FTLX8571D3BNL-E5 850nm 10g SFP module
Networking Cable, 400GbE QSFP56-DD to 4xQSFP28 100GbE, Active Copper Cable, Breakout, 5 meter
This Networking QSFP56-DD to 4xQSFP28 cable provides connectivity up to 5 m. For use in qualified platforms. Networking adds additional functionality to the optics and cables family with the introduction of 400GbE Active Optical Cables and support for additional optics with OS9.10 and OS 6.3.
Compatible 25G SFP28 LR industrial optical modules For Fibre Channel and 25G Ethernet 25GE SFP+ 1310nm 10KM single-mode fiber 5G Network
25GE SFP+ 1310nm 10KM Optical Transceiver: SFP+ optical transceivers are designed for use in Fibre Channel links up to 25.78 Gb/s data rate and up to 10 km link length.
get latest company news
copyright © 2025 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com
friendly links :
