Optical Transceiver Module
AOC
new products
  • XBR-G6MIDR12PTPOD-32G software license
    Brocade XBR-G6MIDR12PTPOD-32G BR-MIDRMFEB-01-Z software license for HD-G620-24-32G switch

    Brand Brocade License PN XBR-G6MIDR12PTPOD-32G License Inside PN  BR-MIDRMFEB-01-Z Place of origin Malaysia Form Factor F/S Inside SFP:8pcs 32G 850nm SW Active Brocade HD-G630-48-32G switch Low End Case Temperature (°C) 0°C High End Case Temperature (°C) 70°C Diagnostics Digital Transmitter VCSEL Receiver PIN Voltage Supply 3.3--5v Connector Dual LC Warranty 1 year Condition new DDMI Yes Time of delivery  Within 24 hours Package Brocade original package

    read more
  • G720-64-32G-F Fiber Optical Switch
    24/64 ports Brocade G720 Switch G720-64-32G-F Fiber Optical Switch

    The Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation, this switch delivers a fixed-port building block designed to maximize the performance of flash and NVMe environments to meet demanding workloads. With Brocade Gen 7 technology, the Brocade G720 delivers far more than just speed and latency improvements. It can eliminate the pain of managing your data center, with autonomous SAN technology to deliver a network that can self-learn, self-optimize, and self-heal without intervention.

    read more
  • QDD-400G-ZRP-S
    Compatible QDD-400G-ZRP-S 400G ZRP Optical Transceivers

    Product Description This MSA compliant QSFP-DD transceiver provides 400GBase-ZR Open ZR+ throughput over Single-mode fiber (SMF) using a coherent wavelength and using an LC connector. It is built to MSA standards and is uniquely serialized and data-traffic and application tested to ensure that they will integrate into your network seamlessly. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. ProLabs’ transceivers are RoHS compliant and lead-free. TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products.

    read more
  • SFP 1.25G FR 15km
    Compatible Mikrotik XS+2733LC15D SFP 1.25G FR Single Mode 1270nm+ 1330nm 15km Optical Transceivers

    Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. Details Product code XS+2733LC15D Connector Single LC UPC Data Rate 1G / 10G / 25G Distance 15 km Format SFP / SFP+ / SFP28 Mode Single mode Wavelength 1270nm + 1330nm

    read more
  • QSFP+ 10G SR 15km
    Compatible Mikrotik XS+2733LC15D 10G QSFP+ SR Optical Transceivers

    Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers

    read more
  • BR6505-24-8G-R/BR6505-24-16GR/BR6505-24-16GR/6505-24-0-R
    12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-24-16GR/BR6510-24-16GR/6505-24-0-R Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01

    12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498

    read more

5m LC UPC To SC UPC Duplex Fiber Patch Cable OS2 Single Mode

The LC/UPC-SC/UPC Fiber Patch Cord Duplex SM G.657.A1 2.0mm 1m Yellow (Part number: PT-SM-LCU-SCU-DX-5M) from Topstar is a Duplex patch cord with LC/UPC connector at one side and a SC/UPC connector at the other one. Fiber patch cords are a type of cables that have two connectors on both ends. Optic patch cords can come in simplex (1 fiber), duplex (2 fibers) or in MPO (12 fibers). The connectors on both sides of the patch cord, allow it to be quickly connected to another device such as an optical switch or other telecommunications/computer device.
  • item no.:

    PT-SM-LCU-SCU-DX-5M
  • brand:

    Top-Trans
  • Warranty:

    1 Year
  • Condition:

    New
  • Distance:

    5m
product details


5m LC UPC To SC UPC Duplex OS2 Single Mode PVC3.0mm Fiber Patch Cable


High Quality and Cost-effective 9/125μm Single Mode Bend Insensitive Fiber Optic Cable

The LC/UPC-SC/UPC Fiber Patch Cord Duplex SM G.657.A1 2.0mm 1m Yellow (Part number: PT-SM-LCU-SCU-DX-5M) from Topstar is a Duplex patch cord with LC/UPC connector at one side and a SC/UPC connector at the other one. Fiber patch cords are a type of cables that have two connectors on both ends. Optic patch cords can come in simplex (1 fiber), duplex (2 fibers) or in MPO (12 fibers). The connectors on both sides of the patch cord, allow it to be quickly connected to another device such as an optical switch or other telecommunications/computer device.

  • Singlemode
  • Polishing UPC
  • Return loss ≥ 55 dB (unmated), >60 dB (mated)
  • Insertion loss ≤ 0,25 dB (Grade B1)
  • Ferrule material Ceramic (zirconia)
  • Ferrule diameter 1.25 mm / 2.5 mm
  • Insertion / extraction cycles Min. 1000

Cable Mechanical Properties

  • Cabled optical fiber OS2
  • Nominal diameter core / sheath 9 / 125 μm
  • Color Yellow
  • Outer diameter 1.6 mm to 3 mm
  • Sheath material LSZH, UL-94 V0
  • Bending radius (static) 45 mm
  • Temperature range -20°C +70°C
  • Attenuation @ 850 / 1300 nm (dB/km) ≤ 3,2 / ≤ 0,8
  • Attenuation @ 1310 / 1383 / 1550 nm (dB/km) ≤ 0,4 / ≤ 0,4 / ≤0,4

Fiber Grade G.657.A1 (Compatible with G.652.D)
Fiber Mode OS2 9/125μm
Wavelength 1310/1550nm
Cable Diameter 3.0mm
Min. Bend Radius (Fiber Core) 10mm

Min. Bend Radius (Fiber Cable) 10/5D (Dynamic/Static)
Attenuation at 1310 nm 0.36 dB/km
Attenuation at 1550 nm
0.22 dB/km
Cable Jacket PVC
Polarity A (Tx) to B (Rx)
Fiber count Duplex
Storage Temperature
-40~80°C




FAQ

Q1. Can you offer OEM/ODM serivce for those fiber patch cables?

A1:Topstar has rich expiriences inproducing OEM/ODM cases becaused of Profession R & D team

  • Customized Logo
  • Printing on Cable
  • Label/PE bag/Carton design
  • Different Color & Different Lengths Available


Q2. How does your company do regarding quality control?

A2: we offer 1 year warranty for those fiber accessories;


Q3. What are the trade terms?

A3: Ex-w, COF, CIP, FOB as client requested;





Send Us An Inquiry

We will contact you as soon as possible!

related products
  • 10M AOC-Q-Q-100G-10M 10M AOC-Q-Q-100G-10M Arista Compatible 100G QSFP28 Active Optical Cable

    Active Optical Cable (AOC) is a cabling technology that accepts same electrical inputs as a traditional copper cable, but uses optical fiber “between the connectors”. AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility with standard electrical interfaces.

  • 5m JNP-QSFP-DAC-5M Direct Attach Copper Cable 5m JNP-QSFP-DAC-5M Direct Attach Copper Cable Compatible Juniper Networks 40G QSFP+ Passive

    40GBase-CU QSFP+ Direct Attach Cable (Passive Twinax, 5m) This is a Juniper Networks JNP-QSFP-DAC-5M compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over active copper with a maximum reach of 5.0m (16.4ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. This direct attach cable is TAA (Trade Agreements Act) compliant, and is built to comply with MSA (Multi-Source Agreement) standards. We stand behind the quality of our products and proudly offer a 3 years warranty. The compatible Juniper Networks JNP-QSFP-DAC-5M Compatible 40G QSFP+ Passive Direct Attach Copper Twinax Cable is designed for use in 40GBASE Ethernet. It provides a QSFP+ to QSFP+ copper direct-attach solution. This cable is compliant with IEEE 802.3ba Ethernet standard and QSFP MSA Compliant.With these features, this easy to install, high speed, cost-effective direct attach copper twinax cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers,such as 40G Switches, Routers, Network Interface Cards (NICs) and Network Storage Systems.

  • 40GBASE-CR4 QSFP To 4 10GBASE-CU Fiber Patch Cable 40GBASE-CR4 QSFP To 4 10GBASE-CU Fiber Patch Cable SFP+ DAC Cable QSFP-4SFP10G-CU3M Compatible

    40GBase-CU QSFP+ Direct Attach Cable (Passive Twinax, 5m) This is a Juniper Networks JNP-QSFP-DAC-5M compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over active copper with a maximum reach of 5.0m (16.4ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. This direct attach cable is TAA (Trade Agreements Act) compliant, and is built to comply with MSA (Multi-Source Agreement) standards. We stand behind the quality of our products and proudly offer a 3 years warranty. The compatible Juniper Networks JNP-QSFP-DAC-5M Compatible 40G QSFP+ Passive Direct Attach Copper Twinax Cable is designed for use in 40GBASE Ethernet. It provides a QSFP+ to QSFP+ copper direct-attach solution. This cable is compliant with IEEE 802.3ba Ethernet standard and QSFP MSA Compliant.With these features, this easy to install, high speed, cost-effective direct attach copper twinax cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers,such as 40G Switches, Routers, Network Interface Cards (NICs) and Network Storage Systems.

  • Cisco QSFP-4X10G-AOC3M Compatible Breakout Active Optical Cable Cisco QSFP-4X10G-AOC3M Compatible Breakout Active Optical Cable 40G QSFP+ To 4x10G SFP+ 3M

    Topstar's QSFP+ to 4 x SFP+ breakout active optical cables (AOC) is designed for the interconnect between 40G Ethernet (40GbE) and 10G Ethernet (10GbE) applications., which is also known as QSFP+ splitter AOC or QSFP+ Fan-out AOC. The QSFP+ to 4x SFP+ breakout AOC offers four parallel, bi-directional channels each operating at up to 10.3125 Gbps. Using industry-leading VCSEL technology, an advanced new light-engine design, and bend-insensitive multimode fiber, this AOC delivers exceptional cost and performance value for 10GbE and 40GbE applications at distances up to 300 meters. The optical end is never exposed to the data center environment; Therefore, no cleaning or special handling is required;

  • 100G QSFP28 AOC Fiber Patch Cable 10M 100G QSFP28 AOC Fiber Patch Cable 10M AOC-Q-Q-100G-10M Arista Compatible

    The Arista AOC-Q-Q-100G-10M Compatible QSFP28 Active Optical Cables are direct-attach fiber assemblies with QSFP28 connectors and operate over Multi-Mode Fiber (MMF). This AOC is compliant with QSFP28 MSA and RoHS-6 standards. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 100Gbps connections within racks and across adjacent racks.

  • PT-SM-LCU-LCU-DX-1M LC UPC To LC UPC Duplex Fiber Patch Cable OS2 Single Mode PVC 3.0mm 1m

    1m LC UPC To LC UPC Fiber Optic Patch Cord Duplex OS2 Single Mode PVC 3.0mm LC-LC Uniboot Duplex OS2 SMF PVC (OFNR) 3.0mm Fiber Optic Patch Cable The 9/125μm OS2 single mode bend insensitive fiber optic cable is less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It can also save more space for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, and any places fiber patch cables are needed.

  • PT-SM-SCU-SCU-DX-10M 10m SC UPC To SC UPC Patch Cord Duplex 3.0mm OFNR 9/125 Single Mode

    10m SC UPC To SC UPC Patch Cord Duplex 3.0mm OFNR 9/125 Single Mode OS1 Single mode cable is used widely in the telecommunications industry for high speed single mode transmission applications. Easily recognized by its yellow jacket and is available in both simplex and duplex formats. The 9/125μm OS2 single mode has a narrow core, and the index of refraction between the core and the cladding changes less than it does for multimode fibers. It is ideally for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, and any places fiber patch cables are needed. This 9/125 OS2 single mode fiber optic cable is ideal for connecting 1G/10G/40G/100G/400G Ethernet connections. SC UPC to SC UPC Duplex OS2 Single Mode PVC , 3.0mm Fiber Optic Patch Cable 1m (3ft) to 20 M(15 ft) SC/UPC to SC/UPC Duplex Single Mode PVC 3.0mm Fiber Optic Patch Cable,G652D;

  • PT-12OM3MPO-10M Aqua 1m MPO MPO Type OFNP fiber optic trunk cable OM3 Multimode

    MPO Female to MPO Female OM3 Multimode Trunk Cable MPO trunk cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles.  it is optimized for 40G QSFP+ SR4/CSR4, 100G QSFP28 SR4 optics direct connection and high-density data center applications.

copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com

chat now

live chat

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!