Optical Transceiver Module
100MB~8GB 16G 32G SFP
new products
  • 400G QSFP-DD FR4 2KM
    Compatible Finisar Cisco T-DQ4CNT-N00 TOP-400G QSFP-DD 400Gb/s QSFP-DD FR4 2km SMF Optical Transceiver

    Compatible Finisar Cisco T-DQ4CNT-N00 TOP-400G QSFP-DD 400Gb/s QSFP-DD FR4 2km SMF Optical Transceiver QSFP-DD MSA compliant,4 CWDM lanes MUX/DEMUX design,100G Lambda MSA 400G-FR4 Specification compliant,Up to 2km transmission on single mode fiber (SMF) with FEC,Operating case temperature: 0 to 70oC,8x53.125Gb/s electrical interface (400GAUI-8),Data Rate 106.25Gbps (PAM4) per channel.,Maximum power consumption 12W,Duplex LC connector,RoHS compliant

    read more
  • QSFP+ 40G
    Finisar FTL410QE4C Compatible 40GBASE SR4 40GBASE-SR4 850nm 150m Gen4 QSFP+ Fiber Module

    Finisar's FTL410QE4C 40G SR4 QSFP+ optical transceivers are designed for use in 40 Gigabit per second links over multimode fiber. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 and breakout to 4* 10GBASE-SR.

    read more
  • 100GBASE QSFP28 Optical Module
    100G QSFP28 Transceiver 100GBASE-ER4 100GB 40KM 5G Optical Module

    Buy 100Gb/s 100GBASE-ER4 40KM QSFP28 transceiver compatible with Juniper Huawei Brocade, Force10 Networks 100GBASE-ER4 (SMF, 1310nm, 40km) & price list on Topstar, Hot pluggable QSFP28 MSA form factor,Compliant to IEEE 802.3ba 100GBASE-ER4,Up to 40km reach for G.652 SMF,Single +3.3V power supply,Operating case temperature: 0~70oC,Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm),Receiver: 4x25Gb/s PIN ROSA,4x28G Electrical Serial Interface (CEI-28G-VSR),Maximum power consumption 4.0W,Duplex LC receptacle,RoHS-6 compliant

    read more
  • 100GBASE QSFP28
    100G QSFP28 100GBASE-LR4 100GB 10KM 5G Wireless SFP Transceiver

    The 100G QSFP28 100GBASE-LR4 10KM transceiver data sheet (singlemode, 1310nm, 10km) is Compatible with Linksys, Ericsson, DCN, Allied, price list on Topstar , buy it now!

    read more
  • 100G CFP
    100G CFP 1310km 10KM 100Gbase-LR4 5G Wireless SFP Transceiver

    The 100G CFP 1310km 10KM 100Gbase-LR4 transceiver's designs are optimized for high performance and cost efficiency to provide customers the best solutions for Datacom and Telecom applications. Hot Pluggable CFP MSA package,IEEE 802.3ba 100GBASE-LR4 compliant,ITU-T 4I1-9D1F compliant,CFP-MSA-HW-Spec-rev1-40 compliant,Up to 10km for G.652 SMF,Receiver: 4-lane x 25Gb/s PIN ROSAs,Transmitter: 4-lane x 25Gb/s LAN-WDM EA-DFB TOSAs (1295.56,1300.05,1304.58,1309.14nm),10x10G Electrical Serial,Interface (CAUI/OTL4.10),MDIO management interface with Digital Diagnostic,+3.3V power supply,Power consumption less than 12W,Compact size: 144.75 x 82 x 13.6 mm,Operating case temperature: 0 to +70 ℃,Duplex SC or LC Receptacle,ROHs-6 compliant

    read more
  • 100G CFP2
    100G CFP2 100GBASE-SR10 100GBASE optical transceiver

    The 100G CFP2 100GBASE-SR10 transceiver's with 10 channels, designs are optimized for high performance and cost efficiency to provide customers the best solutions for Datacom and Telecom applications.

    read more

Compatible Finisar FTLF8526W4BTL 6G 850NM Wireless 300m SFP+ Optical Transceiver

Finisar FTLF8526W4BTL is 6G 850 SFP+, with 1 year warranty. Check datasheet, price and details on www.opticalmodulemanufacturers.com.

  • item no.:

    FTLF8526W4BTL
  • brand:

    Finisar
  • shipping port:

    Shenzhen
  • Warranty:

    1 Year
  • Condition:

    Good
  • Temperature:

    0°C to 70°C
  • Data Rate:

    6G
  • Distance:

    300M
  • Wavelength:

    850nm
  • Connector:

    LC
product details

Finisar FTLF8526W4BTL 6G 850NM Wireless 300m SFP+ Optical Transceiver

Finisar FTLF8526W4BTL 6G 850nm SFP+ Transceiver Module. It can be used in Data Center, Enterprise switch line card applications, Storage, IP network and LAN.


Features

Part number Finisar FTLF8526W4BTL
Data Rate 6G
Wavelength 850nm
Distance 300M
Fiber Type Multi-mode Fiber
Connector LC
Warranty 1-year
Form Factor SFP+
Temperature
-5°C to 70°C
Power Supply 3.3V
Package 10pc/CT


Specifications

  • Up to 6.1 Gb/s bi-directional data links
  • Hot-pluggable SFP+ footprint
  • Built-in digital diagnostic functions
  • 850nm Oxide VCSEL laser transmitter
  • Duplex LC connector
  • RoHS compliant and Lead Free
  • 300m on high-bandwidth 50/125μm (OM3) MMF
  • Metal enclosure, for lower EMI
  • Single 3.3V power supply
  • <0.5W power dissipation
  • Extended operating temperature range: -40°C to 85°C


Application

  • Wireless - CPRI, OBSAI, LTE


Send Us An Inquiry

We will contact you as soon as possible!

related products
  • Finisar FTLF1621P1xCL Used Original Finisar FTLF1621P1xCL 1550nm 80km ZR 2G Optical Modules

    Finisar FTLF1621P1xCL (80km ZR 2G)Small Form Factor Pluggable (SFP) optical transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They comply with SONET OC-48 LR-2 (SDH STM L-16.2) standards, Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC-PI 13.0. They(2G Optical Modules) are compatible with SONET OC-12 SR and SONET OC-3 standards. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

  • Finisar FWLF1523P1x51 Compatible Original Finisar FWLF1523P1x51 1550nm 80km ZX 155 MB SFP modules

    Finisar FWLF1523P1x51 Small Form Factor Pluggable (SFP) transceivers provide a reliable solution for 1511nm, point-to-point, 155Mb/s Optical Supervisory Channel (OSC) applications, outside the band of the transmitted signal. 1550nm 80km ZX 155 MB Modules are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), as well as with SONET and SDH standards at OC-3 LR-2/STM L-1.2 and Fast Ethernet applications.  Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. 155M ZX SFP Modules are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038.

  • Finisar FWLF15197Dxx Compatible Original Finisar FWLF15197Dxx 80km ZX 1G CWDM Optical Modules

    Finisar's FWLF15197Dxx CWDM Small Form Factor Pluggable (SFP) optical transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using Gigabit Ethernet and Fibre Channel networking equipment.The 1G CWDM Optical Modules are available in eight different CWDM wavelengths. Digital diagnostics functions are available via two-wire serial bus. In addition, the 80km CWDM Optical Modules comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).  The optical transceiver is compliant per RoHS Directive 2011/65/EU.

  • Finisar FWLF15197Dxx Original Finisar FWLF16197Dxx Compatible 100km 1.25G CWDM Optical Transceiver

    Finisar FWLF15197Dxx CWDM Small Form Factor Pluggable (SFP) 1.25G CWDM Optical Transceiver is designed for operation in Metro Access Rings and Point-to-Point networks using Gigabit Ethernet and Fibre Channel networking equipment. The 100km 1.25G CWDM are available in eight different CWDM wavelengths. Digital diagnostics functions are available via two-wire serial bus. In addition, the 100km CWDM Optical Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).  The optical transceiver is compliant per RoHS Directive 2011/65/EU.

  • Finisar FTLX6814MCC Compatible Finisar FTLX6814MCC 1600ps/nm 80km Tunable DWDM XFP Optical Transceiver

    This product is a 10Gb/s XFP DWDM transceiver module,which is 10GBASE 40KM DWDM XFP. Finisar FTLX6814MCC transceiver has a maximum reach of 80km at 10.5 Gb/s data rate.

  • CWDM 50km 2G SFP Compatible Original Finisar FWLF15217Dxx 2G 1550nm CWDM 50km Mini-GBIC SFP Transceiver Module

    Finisar FWLF15217Dxx CWDM 50km 2G SFP transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet and Fibre Channel networking equipment. Finisar 50km 2G CWDM are available in eight different CWDM wavelengths and comply with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition, the transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

  • CWDM 50km 2.67G SFP Compatible Finisar FWLF1621P2Txx 1550nm 2.67G CWDM 50km High Density CWDM Transceivers Gigabit Ethernet and Fibre Channel Modules

    Finisar FWLF1621P2Txx CWDM Small Form Factor Pluggable (SFP) transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet Modules and Fibre Channel Modules networking equipment in environments where temperatures are not controlled. CWDM 50km 2.67G SFP is available in eight different CWDM wavelengths and complies with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition, High Density CWDM Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

  • CWDM 80km 2.67G SFP Compatible Finisar FWLF1621P2Txx ZX​ CWDM SFP 80km 2.67G Gigabit Ethernet Optical Transceivers

    Finisar FWLF1621P2Txx CWDM Small Form Factor Pluggable (SFP) ZX CWDM SFP transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet and Fibre Channel networking equipment in environments where temperatures are not controlled. CWDM 80km 2.67G SFP is available in eight different CWDM wavelengths and comply with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition,1550nm 2.67G CWDM Optical Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

copyright © 2021 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com

chat now

live chat

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!