register for newsletter
get latest company news
Brand Brocade License PN XBR-G6MIDR12PTPOD-32G License Inside PN BR-MIDRMFEB-01-Z Place of origin Malaysia Form Factor F/S Inside SFP:8pcs 32G 850nm SW Active Brocade HD-G630-48-32G switch Low End Case Temperature (°C) 0°C High End Case Temperature (°C) 70°C Diagnostics Digital Transmitter VCSEL Receiver PIN Voltage Supply 3.3--5v Connector Dual LC Warranty 1 year Condition new DDMI Yes Time of delivery Within 24 hours Package Brocade original package
read moreThe Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation, this switch delivers a fixed-port building block designed to maximize the performance of flash and NVMe environments to meet demanding workloads. With Brocade Gen 7 technology, the Brocade G720 delivers far more than just speed and latency improvements. It can eliminate the pain of managing your data center, with autonomous SAN technology to deliver a network that can self-learn, self-optimize, and self-heal without intervention.
read moreProduct Description This MSA compliant QSFP-DD transceiver provides 400GBase-ZR Open ZR+ throughput over Single-mode fiber (SMF) using a coherent wavelength and using an LC connector. It is built to MSA standards and is uniquely serialized and data-traffic and application tested to ensure that they will integrate into your network seamlessly. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. ProLabs’ transceivers are RoHS compliant and lead-free. TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products.
read moreKit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. Details Product code XS+2733LC15D Connector Single LC UPC Data Rate 1G / 10G / 25G Distance 15 km Format SFP / SFP+ / SFP28 Mode Single mode Wavelength 1270nm + 1330nm
read moreKit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers
read more12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498
read moreitem no.:
10m SC UPC to SC UPCbrand:
Top-TransWarranty:
1 YearCondition:
NewData Rate:
100GDistance:
10m
10m SC UPC to SC UPC Duplex 3.0mm OFNR 9/125 Single Mode Fiber Patch Cable
Topstar manufactures and supplies Fiber Optic Patch Cord/ Cable/ Jumper/ Lead SC/UPC to SC/APC, 9/125um Singlemode, Simplex, 3mm Cable, 10M Ceramic ferrules
Exceeds industry standards
Guaranteed quality and performance
100% tested and recorded for insertion loss and return loss
Looking for a great deal on 1m (3ft) to 20 M(15 ft) SC/UPC to SC/UPC Duplex Single Mode PVC 3.0mm Fiber Optic Patch Cable ; G652D? Explore a wide range of the best and most affordable fiber optic components which cna meet your deamnd affordable and quality 9/125μm Single Mode Bend Insensitive Fiber Optic Cable offered by Topstar Technology Industrial Co.Ltd.
OS1 Single mode cable is used widely in the telecommunications industry for high speed single mode transmission applications.
Easily recognized by its yellow jacket and is available in both simplex and duplex formats.
The 9/125μm OS2 single mode has a narrow core, and the index of refraction between the core and the cladding changes less than it does for multimode fibers. It is ideally for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, and any places fiber patch cables are needed.
This 9/125 OS2 single mode fiber optic cable is ideal for connecting 1G/10G/40G/100G/400G Ethernet connections.
SC UPC to SC UPC Duplex OS2 Single Mode PVC , 3.0mm Fiber Optic Patch Cable
1m (3ft) to 20 M(15 ft) SC/UPC to SC/UPC Duplex Single Mode PVC 3.0mm Fiber Optic Patch Cable,G652D;
Fiber Type | OM4 50/125um |
Wavelength | 850/1300nm |
10G Ethernet Distance | 400m at 850nm |
40/100G Ethernet Distance | 150m at 850nm |
Polish Type | UPC to UPC |
Minimum Bend Radius | 7.5mm |
Attenuation at 850nm | ≤2.3 dB/km |
Attenuation at 1300nm |
≤0.6 dB/km |
Installation Tensile Load | 66N |
Tensile Strength (Long/Short Term) | 80N/240N |
Premium multimode fiber optic cabling for transmitting 40/100 Gb data and voice signals over short distances. Designed for high-density connections between network equipment in telecom rooms and data centers.
Push/pull tab connectors install/remove with one hand
12-fiber MTP/MPO connectors with 12x density of SC connectors
100% tested for low insertion loss and back reflection
Base-8 Fiber compatible with both QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 connections
50/125 OM4-rated multimode fiber
Aqua color for easy OM4 identification
MTP/MPO Connectors with Push/Pull Tabs
12-fiber female connectors 12 times denser than SC connectors
Push/pull tab connectors easy to install and remove with one hand
100% tested for low insertion loss and back reflection
Error-Free Signal Transfer
50/125 duplex glass fiber construction
Plenum-rated jacket perfect for ceilings, walls and ducts
prev :
5m LC UPC To SC UPC Duplex OS2 Single Mode PVC3.0mm Fiber Patch Cablenext :
1m MPO Female to MPO Female OM3 Multimode Trunk Cable 12 Fibers Type B Plenum OFNP AquaMTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
Description The QSFP-DAC-5M direct attach copper cable assembly (also known as DAC) is suitable for very short distances and offers a highly cost-effective way to establish a 40 Gigabit link connectivity between devices using QSFP+ ports. The QSFP+ DAC cable is designed for 40Gb/s high-speed interconnecting networking applications such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. It fully complies with QSFP+ Multi-Source Agreement (MSA) standards SFF-8436 and IEEE 802.3ba 40GBASE-CR4.Topstar’s high-quality QSFP+ DAC copper cable provides a cost-effective replacement to QSFP+ transceiver and QSFP+ active optical fiber (AOC).
The TOP-BIDI-1.25G-80D transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photo diode integrated with a trans-impedance pre-amplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
PT-12FMPOOM4-3M 3m MPO-12 (Female) to MPO-12 (Female) multimode 12 Fibers, Type B, Plenum (OFNP), Aqua Trunk Cable
Used Finisar FTLF1436P3BCL 25G LR SFP28 1310nm 10KM LC Optical Fiber Transceiver SFP28 Module Rate:25Gb/s,Wavelength:1310nm,Distance:10KM,Connector:LC/MPO Connector,Diagnostics:digital,Name:SFP28 LR,Temperature:0°C~70°C,Voltage supply:3.3v,Application:Telecom Datacom
copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com