+86-15989863956
lisa@topsfp.com
English
русский
español
العربية
中文
register for newsletter
get latest company news
Brand Brocade License PN XBR-G6MIDR12PTPOD-32G License Inside PN BR-MIDRMFEB-01-Z Place of origin Malaysia Form Factor F/S Inside SFP:8pcs 32G 850nm SW Active Brocade HD-G630-48-32G switch Low End Case Temperature (°C) 0°C High End Case Temperature (°C) 70°C Diagnostics Digital Transmitter VCSEL Receiver PIN Voltage Supply 3.3--5v Connector Dual LC Warranty 1 year Condition new DDMI Yes Time of delivery Within 24 hours Package Brocade original package
read more
The Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation, this switch delivers a fixed-port building block designed to maximize the performance of flash and NVMe environments to meet demanding workloads. With Brocade Gen 7 technology, the Brocade G720 delivers far more than just speed and latency improvements. It can eliminate the pain of managing your data center, with autonomous SAN technology to deliver a network that can self-learn, self-optimize, and self-heal without intervention.
read more
Product Description This MSA compliant QSFP-DD transceiver provides 400GBase-ZR Open ZR+ throughput over Single-mode fiber (SMF) using a coherent wavelength and using an LC connector. It is built to MSA standards and is uniquely serialized and data-traffic and application tested to ensure that they will integrate into your network seamlessly. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. ProLabs’ transceivers are RoHS compliant and lead-free. TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products.
read more
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. Details Product code XS+2733LC15D Connector Single LC UPC Data Rate 1G / 10G / 25G Distance 15 km Format SFP / SFP+ / SFP28 Mode Single mode Wavelength 1270nm + 1330nm
read more
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers
read more
12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498
read more
Description
The QSFP-DAC-5M direct attach copper cable assembly (also known as DAC) is suitable for very short distances and offers a highly cost-effective way to establish a 40 Gigabit link connectivity between devices using QSFP+ ports. The QSFP+ DAC cable is designed for 40Gb/s high-speed interconnecting networking applications such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. It fully complies with QSFP+ Multi-Source Agreement (MSA) standards SFF-8436 and IEEE 802.3ba 40GBASE-CR4.Topstar’s high-quality QSFP+ DAC copper cable provides a cost-effective replacement to QSFP+ transceiver and QSFP+ active optical fiber (AOC).
item no.:
5m JNP-QSFP-DAC-5Mbrand:
Top-TransWarranty:
1 YearCondition:
NewData Rate:
40GDistance:
5mConnector:
MPO
5m LC UPC To SC UPC Duplex OS2 Single Mode PVC3.0mm Fiber Patch Cable
40GBase-CU QSFP+ Direct Attach Cable (Passive Twinax, 5m)
This is a Juniper Networks JNP-QSFP-DAC-5M compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over active copper with a maximum reach of 5.0m (16.4ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. This direct attach cable is TAA (Trade Agreements Act) compliant, and is built to comply with MSA (Multi-Source Agreement) standards. We stand behind the quality of our products and proudly offer a 3 years warranty.
The compatible Juniper Networks JNP-QSFP-DAC-5M Compatible 40G QSFP+ Passive Direct Attach Copper Twinax Cable is designed for use in 40GBASE Ethernet. It provides a QSFP+ to QSFP+ copper direct-attach solution. This cable is compliant with IEEE 802.3ba Ethernet standard and QSFP MSA Compliant.With these features, this easy to install, high speed, cost-effective direct attach copper twinax cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers,such as 40G Switches, Routers, Network Interface Cards (NICs) and Network Storage Systems.
Features
● QSFP conforms to the Small Form Factor SFF-8436
● 4-Channel Full-Duplex Passive Copper Cable
● Operates 1G to 10.3125 Gbps data rate per channel(per channel)
● Maximum aggregate data rate: 40 Gb/s (4 x 10Gb/s)
● Available in lengths of 0.5m(1.6ft) to 7m (23ft)
● High-Density QSFP 38-PIN Connector
● Low power consumption: 0.02 W (typ.)
● I2C based two-wire serial interface for EEPROM signature
● Single 3.3V power supply
● 24AWG to 30AWG cable available
● Operating temperature range: 0 to 70°C
● RoHS Compliant and Lead-Free
Applications
● 40 Gigabit Ethernet links
● Fiber Channel over Ethernet
● Data storage and communication industry
● Switches, servers,routers and HBA
● Enterprise network
| Max Data Rate | 40Gbps |
| Minimum Bend Radius | 40mm |
| Jacket Material | PVC |
| Cable Type | Copper Cable |
| DDM/DOM | NA |
| Wire AWG | 26 AWG |
| Cable impedance | 100 Ω |
| Power supply | 3.3V |
| Protocols |
40GbE and high-density 10GbE interconnects Datacom/Telecom switch & router connections Data aggregation and backplane applications Proprietary high-speed Interconnections Infiniband Connectivity SDR/DDR/QDR Data center cabling infrastructure |
Description
The QSFP-DAC-5M direct attach copper cable assembly (also known as DAC) is suitable for very short distances and offers a highly cost-effective way to establish a 40 Gigabit link connectivity between devices using QSFP+ ports. The QSFP+ DAC cable is designed for 40Gb/s high-speed interconnecting networking applications such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. It fully complies with QSFP+ Multi-Source Agreement (MSA) standards SFF-8436 and IEEE 802.3ba 40GBASE-CR4.Topstar’s high-quality QSFP+ DAC copper cable provides a cost-effective replacement to QSFP+ transceiver and QSFP+ active optical fiber (AOC).
5M 12 fibers MTP Female OM4 Multimode Type B Plenum MTP Trunk Cable
MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
10M 8 fibers MTP Female to MTP Female OM4 Multimode Type B, Plenum Elite Trunk Cable
MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
1m MPO Female to MPO Female OM3 Multimode Trunk Cable 12 Fibers Type B Plenum OFNP Aqua
MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
10m SC UPC to SC UPC Duplex 3.0mm OFNR 9/125 Single Mode Fiber Patch Cable
MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
5m LC UPC To SC UPC Duplex OS2 Single Mode PVC3.0mm Fiber Patch Cable
MTP stands for multi-fiber termination push-on connector, which is a registered trademark of US Conec. MTP Wiki defines it as a brand name for a version of MPO connectors with improved specifications. MTP and MPO connectors are completely compatible and inter-mateable: an MPO cable can be plugged into an MTP outlet and vice versa. But note that, MTP connector is designed with better mechanical and optical performance. MTP connectors use a special design, which is available in female (without pins) and male (with pins) versions as shown in the following picture. The pins can ensure proper alignment of the connectors when mating two MTP connectors. MTP connectors also have an extrusion, called a “key”. “Key up” and “key down” are the two types of the “key”. “Key up” means that the extrusion on the connector is facing up, while “key down” means facing down. MTP fiber optic cable can bring together 8/12/24/48 fibers in a single MTP interface, which increases the cable density, and offers savings in circuit card and rack space. Commonly, MTP cable is used for 40G/100G transmission.
Compatible Arista Hot pluggable 40GBASE-PLR4 QSFP+ 40G PLR4 SMF 10km Optical Transceiver
Compatible Arista Hot pluggable 40GBASE-PLR4 QSFP+ 40G PLR4 SMF 10km Optical Transceiver,Up to 10km over parallel single-mode fifiber (Optical interoperability with 4x10G LR up to 10km and LRL up to 1km)
Compatible Alcatel-Lucent 3FE65832AA 3HE05036AA Compatible 10GBASE-ER SFP+ 1550nm 40km Transceiver
Compatible Alcatel-Lucent 3FE65832AA 3HE05036AA Compatible 10GBASE-ER SFP+ 1550nm 40km Transceiver，Up to 40km。 This compatible 3FE65832AA 3HE05036AA supports 10.3125Gbps (10GBASE-ER) or 9.953Gbps (10GBASE-EW) connectivity up to a maximum distance of 40km (24.8 mi) over single mode fiber (SMF) at a wavelength of 1550nm. This compatible SFP+ transceiver has been programmed and tested to work as the original Nokia (Alcatel-Lucent) 3FE65832AA 3HE05036AA 10GBASE-ER SFP+ optics. It is suitable for Nokia (Alcatel-Lucent) network switches, routers, firewalls, security gateway, fiber media converter, network adapters, servers, network interface card (NICs), NAS, accelerator card. This 10G SFP+ transceiver is ideal for connectivity needs in large data centers, enterprise wiring closets, large campuses, Metro Area Networks, Remote Radio (RRU), and Baseband Unit (BBU).
Compatible WTD RTXM228-401 10GB/s 10Km SFP+ 1310 nm Transceivers
Compatible WTD 10Gb/s SFP+ RTXM228-401 1310nm 150m LC Optical Module transceiver are designed for optical interfaces for data communications with Single mode fiber(SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.
get latest company news
copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com
friendly links :
