Optical Transceiver Module
100MB~8GB SFP
new products

Hot-pluggable Finisar FTLC1122SDNL 100GBASE-LR4 and OTU4 Dual Rate 10km Gen2 CFP2 Optical Transceiver

Form Factor: 
CFP2

Finisar’s FTLC1122SDNL second-generation 100G CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTU4 client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F OTL4.4 requirements specified in ITU-T, and IEEE standards, and ITU-T Recommendations G.709/Y.1331.  Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and Finisar Application Note AN-2118.  The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

  • item no.:

    100G CFP2 LC 10km
  • brand:

    Finisar
  • Warranty:

    3 Years
  • Condition:

    New
  • Temperature:

    0-75
  • Data Rate:

    112 Gb/s
  • Distance:

    10km
  • Wavelength:

    1310nm
  • Connector:

    LC
product details

Description:


Distance:10 km
Data Rate (max):112 Gb/s
Protocol:100G Ethernet Compliant
Low End Case Temperature (°C):0
High End Case Temperature (°C):75
Diagnostics:Digital
Transmitter:4x LWDM DFB Laser
Receiver:PIN
Voltage Supply:3.3
Connector:LC
Wavelength:1310nm Band

Product Feature:


Hot-pluggable CFP2 form factor
Supports 103.1Gb/s and 112Gb/s aggregate bit rates
Power dissipation < 5W
RoHS-6 compliant (lead-free)
Commercial case temperature range of 0°C to 75°C
Single 3.3V power supply
Maximum link length of 10km on Single Mode Fiber (SMF)
4x28Gb/s DFB-based LAN-WDM transmitter
4x28G electrical interface
Duplex LC receptacles
MDIO management interface

Send Us An Inquiry

We will contact you as soon as possible!

related products
  • Finisar FTLF1621P1xCL Original Finisar FTLF1621P1xCL 1550nm 80km ZR 2G Optical Modules

    Finisar FTLF1621P1xCL (80km ZR 2G)Small Form Factor Pluggable (SFP) optical transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They comply with SONET OC-48 LR-2 (SDH STM L-16.2) standards, Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC-PI 13.0. They(2G Optical Modules) are compatible with SONET OC-12 SR and SONET OC-3 standards. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.

  • Finisar FWLF1523P1x51 Original Finisar FWLF1523P1x51 1550nm 80km ZX 155 MB SFP modules

    Finisar FWLF1523P1x51 Small Form Factor Pluggable (SFP) transceivers provide a reliable solution for 1511nm, point-to-point, 155Mb/s Optical Supervisory Channel (OSC) applications, outside the band of the transmitted signal. 1550nm 80km ZX 155 MB Modules are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), as well as with SONET and SDH standards at OC-3 LR-2/STM L-1.2 and Fast Ethernet applications.  Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. 155M ZX SFP Modules are RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038.

  • Finisar FWLF15197Dxx Original Finisar FWLF15197Dxx 80km ZX 1G CWDM Optical Modules

    Finisar's FWLF15197Dxx CWDM Small Form Factor Pluggable (SFP) optical transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using Gigabit Ethernet and Fibre Channel networking equipment.The 1G CWDM Optical Modules are available in eight different CWDM wavelengths. Digital diagnostics functions are available via two-wire serial bus. In addition, the 80km CWDM Optical Modules comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).  The optical transceiver is compliant per RoHS Directive 2011/65/EU.

  • Finisar FWLF15197Dxx Original Finisar FWLF16197Dxx 100km 1.25G CWDM Optical Transceiver

    Finisar FWLF15197Dxx CWDM Small Form Factor Pluggable (SFP) 1.25G CWDM Optical Transceiver is designed for operation in Metro Access Rings and Point-to-Point networks using Gigabit Ethernet and Fibre Channel networking equipment. The 100km 1.25G CWDM are available in eight different CWDM wavelengths. Digital diagnostics functions are available via two-wire serial bus. In addition, the 100km CWDM Optical Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).  The optical transceiver is compliant per RoHS Directive 2011/65/EU.

  • CWDM 50km 2G SFP Original Finisar FWLF15217Dxx 2G 1550nm CWDM 50km Mini-GBIC SFP Transceiver Module

    Finisar FWLF15217Dxx CWDM 50km 2G SFP transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet and Fibre Channel networking equipment. Finisar 50km 2G CWDM are available in eight different CWDM wavelengths and comply with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition, the transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

  • CWDM 50km 2.67G SFP Finisar FWLF1621P2Txx 1550nm 2.67G CWDM 50km High Density CWDM Transceivers Gigabit Ethernet and Fibre Channel Modules

    Finisar FWLF1621P2Txx CWDM Small Form Factor Pluggable (SFP) transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet Modules and Fibre Channel Modules networking equipment in environments where temperatures are not controlled. CWDM 50km 2.67G SFP is available in eight different CWDM wavelengths and complies with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition, High Density CWDM Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

  • CWDM 80km 2.67G SFP Finisar FWLF1621P2Txx ZX​ CWDM SFP 80km 2.67G Gigabit Ethernet Optical Transceivers

    Finisar FWLF1621P2Txx CWDM Small Form Factor Pluggable (SFP) ZX CWDM SFP transceivers are designed for operation in Metro Access Rings and Point-to-Point networks using SONET, Gigabit Ethernet and Fibre Channel networking equipment in environments where temperatures are not controlled. CWDM 80km 2.67G SFP is available in eight different CWDM wavelengths and comply with ITU CWDM standard. Digital diagnostics functions can be accessed via an I2C serial bus. In addition,1550nm 2.67G CWDM Optical Transceivers comply with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) are RoHS and lead-free compliant per Directive 2011/65/EU and Finisar Application Note AN-2038.

  • CWDM 40km 4.25G SFP Finisar FWLF1524P2Vxx 1550NM CWDM EX SFP High Density Optical Transceivers

    Finisar FWLF1524P2Vxx Small Form Factor Pluggable (SFP) SFP EX Optical Transceivers is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). CWDM EX SFP is designed for operation in Metro Access Rings and Point-to-Point networks using Fibre Channel and Gigabit Ethernet networking equipment by selecting the appropriate line rate. High Density CWDM Transceivers is available in eight different CWDM wavelengths and is RoHS compliant and lead-free per Directive 2011/65/EU and Finisar Application Note AN-2038.

copyright © 2019 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com

chat now

live chat

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!