OM4 Multimode Type B Plenum MTP Trunk Cable 5M 12 Fibers MTP Female 12fmtpom4

Active Optical Cable (AOC) is a cabling technology that accepts same electrical inputs as a traditional copper cable, but uses optical fiber “between the connectors”. AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility with standard electrical interfaces.

40GBase-CU QSFP+ Direct Attach Cable (Passive Twinax, 5m) This is a Juniper Networks JNP-QSFP-DAC-5M compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over active copper with a maximum reach of 5.0m (16.4ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. This direct attach cable is TAA (Trade Agreements Act) compliant, and is built to comply with MSA (Multi-Source Agreement) standards. We stand behind the quality of our products and proudly offer a 3 years warranty. The compatible Juniper Networks JNP-QSFP-DAC-5M Compatible 40G QSFP+ Passive Direct Attach Copper Twinax Cable is designed for use in 40GBASE Ethernet. It provides a QSFP+ to QSFP+ copper direct-attach solution. This cable is compliant with IEEE 802.3ba Ethernet standard and QSFP MSA Compliant.With these features, this easy to install, high speed, cost-effective direct attach copper twinax cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers,such as 40G Switches, Routers, Network Interface Cards (NICs) and Network Storage Systems.

40GBase-CU QSFP+ Direct Attach Cable (Passive Twinax, 5m) This is a Juniper Networks JNP-QSFP-DAC-5M compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over active copper with a maximum reach of 5.0m (16.4ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. This direct attach cable is TAA (Trade Agreements Act) compliant, and is built to comply with MSA (Multi-Source Agreement) standards. We stand behind the quality of our products and proudly offer a 3 years warranty. The compatible Juniper Networks JNP-QSFP-DAC-5M Compatible 40G QSFP+ Passive Direct Attach Copper Twinax Cable is designed for use in 40GBASE Ethernet. It provides a QSFP+ to QSFP+ copper direct-attach solution. This cable is compliant with IEEE 802.3ba Ethernet standard and QSFP MSA Compliant.With these features, this easy to install, high speed, cost-effective direct attach copper twinax cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers,such as 40G Switches, Routers, Network Interface Cards (NICs) and Network Storage Systems.

Topstar's QSFP+ to 4 x SFP+ breakout active optical cables (AOC) is designed for the interconnect between 40G Ethernet (40GbE) and 10G Ethernet (10GbE) applications., which is also known as QSFP+ splitter AOC or QSFP+ Fan-out AOC. The QSFP+ to 4x SFP+ breakout AOC offers four parallel, bi-directional channels each operating at up to 10.3125 Gbps. Using industry-leading VCSEL technology, an advanced new light-engine design, and bend-insensitive multimode fiber, this AOC delivers exceptional cost and performance value for 10GbE and 40GbE applications at distances up to 300 meters. The optical end is never exposed to the data center environment; Therefore, no cleaning or special handling is required;

The Arista AOC-Q-Q-100G-10M Compatible QSFP28 Active Optical Cables are direct-attach fiber assemblies with QSFP28 connectors and operate over Multi-Mode Fiber (MMF). This AOC is compliant with QSFP28 MSA and RoHS-6 standards. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 100Gbps connections within racks and across adjacent racks.

The LC/UPC-SC/UPC Fiber Patch Cord Duplex SM G.657.A1 2.0mm 1m Yellow (Part number: PT-SM-LCU-SCU-DX-5M) from Topstar is a Duplex patch cord with LC/UPC connector at one side and a SC/UPC connector at the other one. Fiber patch cords are a type of cables that have two connectors on both ends. Optic patch cords can come in simplex (1 fiber), duplex (2 fibers) or in MPO (12 fibers). The connectors on both sides of the patch cord, allow it to be quickly connected to another device such as an optical switch or other telecommunications/computer device.

1m LC UPC To LC UPC Fiber Optic Patch Cord Duplex OS2 Single Mode PVC 3.0mm LC-LC Uniboot Duplex OS2 SMF PVC (OFNR) 3.0mm Fiber Optic Patch Cable The 9/125μm OS2 single mode bend insensitive fiber optic cable is less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It can also save more space for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, and any places fiber patch cables are needed.

10m SC UPC To SC UPC Patch Cord Duplex 3.0mm OFNR 9/125 Single Mode OS1 Single mode cable is used widely in the telecommunications industry for high speed single mode transmission applications. Easily recognized by its yellow jacket and is available in both simplex and duplex formats. The 9/125μm OS2 single mode has a narrow core, and the index of refraction between the core and the cladding changes less than it does for multimode fibers. It is ideally for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, and any places fiber patch cables are needed. This 9/125 OS2 single mode fiber optic cable is ideal for connecting 1G/10G/40G/100G/400G Ethernet connections. SC UPC to SC UPC Duplex OS2 Single Mode PVC , 3.0mm Fiber Optic Patch Cable 1m (3ft) to 20 M(15 ft) SC/UPC to SC/UPC Duplex Single Mode PVC 3.0mm Fiber Optic Patch Cable,G652D;