+86-15989863956
lisa@topsfp.com
English
русский
español
العربية
中文
register for newsletter
get latest company news
Brand Brocade License PN XBR-G6MIDR12PTPOD-32G License Inside PN BR-MIDRMFEB-01-Z Place of origin Malaysia Form Factor F/S Inside SFP:8pcs 32G 850nm SW Active Brocade HD-G630-48-32G switch Low End Case Temperature (°C) 0°C High End Case Temperature (°C) 70°C Diagnostics Digital Transmitter VCSEL Receiver PIN Voltage Supply 3.3--5v Connector Dual LC Warranty 1 year Condition new DDMI Yes Time of delivery Within 24 hours Package Brocade original package
read more
The Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation, this switch delivers a fixed-port building block designed to maximize the performance of flash and NVMe environments to meet demanding workloads. With Brocade Gen 7 technology, the Brocade G720 delivers far more than just speed and latency improvements. It can eliminate the pain of managing your data center, with autonomous SAN technology to deliver a network that can self-learn, self-optimize, and self-heal without intervention.
read more
Product Description This MSA compliant QSFP-DD transceiver provides 400GBase-ZR Open ZR+ throughput over Single-mode fiber (SMF) using a coherent wavelength and using an LC connector. It is built to MSA standards and is uniquely serialized and data-traffic and application tested to ensure that they will integrate into your network seamlessly. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. ProLabs’ transceivers are RoHS compliant and lead-free. TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products.
read more
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. Details Product code XS+2733LC15D Connector Single LC UPC Data Rate 1G / 10G / 25G Distance 15 km Format SFP / SFP+ / SFP28 Mode Single mode Wavelength 1270nm + 1330nm
read more
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers
read more
12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498
read more
Cisco QSFP-100G-FR-S Transceiver's Overview
The QSFP28 FR-S module supports 100G link lengths of up to 2km over duplex G.652 SMF. It accepts duplex LC connectors. FR-S is a single-lambda 100G optic and contains an internal processor chip that performs PAM4 (Pulse Amplitude Modulation), KP4 FEC (Forward Error Correction), and a gearbox to convert the 4x25G electrical signals from the host port to a single channel 100G optical signal.
FR-S interoperates with 400G optical interfaces such as IEEE 400GBASE-DR4, and Cisco’s 4x100G FR QSFP-DD module via fiber breakout cable. FR-S complies with the 100G-FR specification issued by the 100G Lambda MSA. It is primarily used in data center, enterprise, and service provider applications.
item no.:
QSFP-100G-FR-Slead time:
2-3 working daysproduct orgin:
Chinabrand:
Top-Transshipping port:
Shenzhenpayment:
ex-wWarranty:
3 YearsCondition:
NewTemperature:
10℃~70℃/ -5℃~85℃/ -20℃~85℃Data Rate:
100GDistance:
2kmWavelength:
1310nmConnector:
LC
Cisco QSFP-100G-FR-S 10-3284-02 QSFP28 100G FR 2km SMF Optical Module With Duplex LC Connector
Cisco QSFP-100G-FR-S Transceiver's Overview
The QSFP28 FR-S module supports 100G link lengths of up to 2km over duplex G.652 SMF. It accepts duplex LC connectors. FR-S is a single-lambda 100G optic and contains an internal processor chip that performs PAM4 (Pulse Amplitude Modulation), KP4 FEC (Forward Error Correction), and a gearbox to convert the 4x25G electrical signals from the host port to a single channel 100G optical signal.
FR-S interoperates with 400G optical interfaces such as IEEE 400GBASE-DR4, and Cisco’s 4x100G FR QSFP-DD module via fiber breakout cable. FR-S complies with the 100G-FR specification issued by the 100G Lambda MSA. It is primarily used in data center, enterprise, and service provider applications.
Parameters for the Cisco QSFP28 100G Optical Transceiver:
|
The first product in Cisco’s line of single-lambda 100G optics is the 100G FR (Product ID QSFP-100G-FR-S). It’s a 100G pluggable optical transceiver in a QSFP28 form factor that performs PAM4 modulation, among other things, inside the module. It complies with the 100G Lambda MSA’s 100G-FR specification, which has a reach of 2km over duplex SMF and uses duplex LC connectors. This is the same reach, fiber, and connector as CWDM4 which has been very popular in data centers. You can use FR in any application that CWDM4 has been used.
When it comes to network deployment strategies, you may be accustomed to treating pluggable optics as an afterthought. But over the past several years, higher data rate pluggable optics have been developed to keep up with bandwidth demands in data centers and service provider networks. And with those higher data rates comes increased complexity in transceiver module design and their interactions with switch and router host ports. Today we’re at the point where 100G optics are a consideration in your network hardware cost and fiber infrastructure design.
Cisco’s vision is to simplify 100G pluggable optics. With fewer components in the pluggable module, we can scale manufacturing volume and cost to the level of today’s 10G SFP+ optics. Through silicon photonics and signal processing technology, Cisco has taken the first step toward that vision: single – lambda 100G optics. When new generation form factors are available, you’ll be able to re-use the first generation and transition gradually. It will also allow you to upgrade to 400G host platforms one site at a time.
Photo for Cisco QSFP28 100G QSFP-100G-FR-S Transceiver
FAQ
Q1. Except for this Cisco QSFP28 100G QSFP-100G-FR-S optical modules, what else Cisco sfp can you offer?
A1: Topstar can offer Cisco optical module from 1G SFP, 10G SFP+, 16G/32G FC SFP+, 25G SFP28, 40G QSFP+ to 100G QSFP28, etc....
Q2. How do you guarantee the Cisco QSFP28 100G optical transceiver you offer is genuine?
A2: 1st, Topstar's target is to be a respected century-enterprise, based on this, we only sell 100% genuine brand transceiver because reputation worths more;
2nd, Topstar works on this optical transceiver field for 16 years, we have our mature supply chain, all the Cisco cooperators is verfied;
3rd, we have our strict procedure for how to verify the identify true and false of the Cisco transceiver by label,appearance,serial number checking, and also test equipment;
4th, if you found any faked or copied Cisco optical module from us, we will refund and afford all the freight for ship and return;
Q3. How does your company do regarding quality control for this Cisco QSFP28 100G optical module?
A3: Every single optic individually tested in our test center to make sure it can work befor shipment;
prev :
Cisco QSFP-100G-DR-S 10-3057-01 QSFP28 100GBASE DR Optical Module 500m Over SMFnext :
Cisco QSFP-100G-CWDM4-S 10-3145-02 QSFP28 100G CWDM4 2km SMF Optical TransceiverModule
100G QSFP28 100GBASE-LR4 100GB 10KM 5G Wireless SFP Transceiver
The 100G QSFP28 100GBASE-LR4 10KM transceiver data sheet (singlemode, 1310nm, 10km) is Compatible with Linksys, Ericsson, DCN, Allied, price list on Topstar , buy it now!
100G QSFP28 Transceiver 100GBASE-ER4 100GB 40KM 5G Optical Module
Buy 100Gb/s 100GBASE-ER4 40KM QSFP28 transceiver compatible with Juniper Huawei Brocade, Force10 Networks 100GBASE-ER4 (SMF, 1310nm, 40km) & price list on Topstar, Hot pluggable QSFP28 MSA form factor,Compliant to IEEE 802.3ba 100GBASE-ER4,Up to 40km reach for G.652 SMF,Single +3.3V power supply,Operating case temperature: 0~70oC,Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm),Receiver: 4x25Gb/s PIN ROSA,4x28G Electrical Serial Interface (CEI-28G-VSR),Maximum power consumption 4.0W,Duplex LC receptacle,RoHS-6 compliant
100G QSFP28 CWDM 2KM MPO Multi Mode Fiber Transceiver
This product is a 100Gb/s transceiver module,which is 10GBASE 100G QSFP28 CWDM 2KM. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.
100G QSFP28 100GBASE-SR4 100GB 100M SR Transceiver Module
The 100G QSFP28 100GBASE-SR4 module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.
Finisar FTLC1152SGPL compatible 100GBASE-IR4 CWDM QSFP 2KM QSFP28 module
This product is a 100Gb/s transceiver module designed for optical communication applications compliant with the QSFP MSA,CWDM4 MSA and portions of IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts them to 4 output channels of electrical data.
Finisar FTLC9551REPM compatible 100GBASE-SR4 OTU4&128G 100m QSFP
This product is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 100 meters of OM4 multi-mode fiber.
Finisar FTLC1151RDPL compatible 100GBASE-LR4 10km 100G QSFP28 CWDM4 Optical Transceiver
This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.
Compatible Finisar FTLC1151RDPL Compatible 100GBASE-LR4 QSFP28 10km Optical Module
This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.
get latest company news
copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com
friendly links :
